Aliquota IVA applicata: 22%
Automatic cleaning, tailored to each clinic.
Multifunction benchtop basin, ideal for clinics that want to optimize and automate the cleaning and disinfection process of their instruments.
Eurosafe Smart washes and dries instruments in a single, fast, automated, repeatable, and traceable process. Furthermore, when used in synergy with the multi-enzyme disinfectant and detergent Sanifizer Automatic, it combines the effectiveness of ultrasonic washing with the cleaning and disinfection of the load, while fully respecting the materials being treated.
It allows you to choose between three pre-set washing programs and six ultrasonic cleaning programs, as well as the possibility to customize some cycle parameters.
Equipped with a cartridge system for refilling Sanifizer Automatic, located in the practical front space-saving compartment, which ensures ease of use and safety for the operator. The anti-waste dispenser automatically draws the liquid according to the program and load, while the integrated softener monitors the correct regeneration of the resins, warning in case of lack of salt.
At the end of each cycle, the multi-function tank creates a file that can be transferred to a PC via USB, containing all the process data (outcome, duration, amount of detergent, operator). Furthermore, it is possible to transfer data via Ethernet connection and manage it using the E-Data and E-Memory software.
Class I Medical Device
Optimized
Thanks to its 10-liter washing chamber, it can accommodate a full load from a 24-liter autoclave. It is equipped with two shelves to maximize space inside the tank. All this in a countertop device that maximizes operability while minimizing external footprint.
Practice
Eurosafe Smart is designed with attention to detail to ensure maximum user accessibility: the top-opening system of the tank makes the load easily inspectable and optimizes space (only 78 cm of height is needed for the device placement); the Sanifizer Automatic refill takes place via a cartridge system in the front compartment, ensuring practicality, speed and safety; the salt compartment, also located at the front, simplifies loading, which is possible even during washing.
User-friendly
The 4.3'' touchscreen display features a simple and intuitive interface, allowing you to choose from three preset washing programs (pre-wash, standard, intensive) and six ultrasonic cleaning programs. In just a few clicks, you can access all functions and customize the washing cycles by selecting load, duration, temperature, drying, and detergent concentration to suit your needs.
Customizable
In all pre-set washing cycles, you can select the half-load option (using only one shelf) to optimize time and water and detergent consumption, and the ECO mode to reduce detergent consumption by 30%, without affecting cleaning performance. You can also start a custom cycle by defining the temperature, washing and drying duration, and detergent concentration.
Automated washing
Washes and dries in a single process.
Eurosafe Smart performs pre-washing, ultrasonic washing, and drying in a single cycle, eliminating the need for manual cleaning and ensuring more effective results in less time and with less risk to the operator. It also allows for control and customization of washing and drying parameters (duration, detergent concentration, and temperature).
Used in synergy with the multi-enzyme disinfectant and detergent Sanifizer Automatic, it combines the effectiveness of ultrasonic washing with the cleaning and disinfection of the load, while fully respecting the materials being treated. The use of Eurosafe Smart with Sanifizer Automatic meets the requirements of standard EN 15883-5.
To ensure maximum efficiency and reduce waste, Eurosafe Smart is equipped with a dispenser that automatically adjusts the disinfectant dosage based on the selected program and load.
Pre-wash
It is carried out using cold water and aims to remove organic matter and the most superficial dirt.
Washing (ultrasound + cleaning and disinfection)
When the water reaches 40°C, Sanifizer Automatic is injected, guaranteeing a combined action of cleaning and disinfection. Thanks to its neutral pH, it is also suitable for the most delicate materials, preventing oxidative and corrosive effects on the instruments.
Next, ultrasonic cleaning and disinfection take place. High-frequency sound waves effectively remove even the most stubborn residues, such as dirt, cement, and debris, ensuring thorough and accurate cleaning. This process also reaches the internal surfaces of the instruments without damaging them.
Rinse
It removes any detergent residue from the load, used in the previous phase.
Drying
The final phase of the process is achieved through an effective distribution of hot air at 120°C inside the chamber, resulting in perfectly dry material ready for packaging when the device is opened.
Cavitation is the principle behind ultrasonic cleaning: ultrasonic waves generate microbubbles inside the liquid in the tank, which then implode.
This process allows for the removal of dirt residue even from the most difficult-to-reach surfaces, ensuring deep and even cleaning without damaging the materials.
Degas Phase
The first phase involves degassing the immersion fluid. This process removes dissolved gases from the water that could interfere with cavitation. During degassing, the machine emits ultrasound by alternating pulses and pauses, allowing gas bubbles to rise to the surface and dissipate. Once complete, cavitation will be more effective and cleaning will be more uniform.
Boost Phase
It consists of amplifying the power of ultrasound to remove the most stubborn dirt. This phase has a limited duration to avoid damaging the most delicate materials.
Normal Phase
The power and frequency of the ultrasound are set to normal and optimal levels for the daily cleaning of instruments that do not require intensive treatment.
Phase Sweep
It ensures a homogeneous distribution of ultrasonic waves inside the tank by slightly varying the frequency of the ultrasonic waves continuously and in a controlled manner. The advantage of this technology is twofold: it improves the cleaning effectiveness and optimizes cavitation.
Traceability
Total control and process security
Eurosafe Smart allows you to track all cycles performed: at the end of each cycle, a file is created containing all process data (outcome, duration, amount of detergent, operator) which can be transferred to a PC via USB or Ethernet connection (both included). The data on the PC can be managed using the dedicated software: E-Data and E-Memory. It is also possible to enable up to twenty users, after entering a password.
E-Memory
E-Memory is software for archiving, managing, and ensuring complete traceability of all sterilization cycles and data directly on a PC. The software acquires sterilization process data automatically, semi-automatically, or manually, storing it on the PC where it can be easily organized, searched, printed, or emailed.
Dimensions with lid closed: 46 x 45.5 x 61 cm (l x w x h)
Dimensions with lid open: 46 x 77.5 x 61 cm (l x w x h)
Weight 45Kg
Camera capacity 10L
Power consumption 2300W